Home
About Milward
Master Alloys
Phosphorus-Copper
Custom Alloys
Quality Assurance
Industry Links
Distributors
Contact Us
Site Map
Technical Procedures & Support
Highly qualified, degreed personnel, supported by state-of-the-art computer and laboratory equipment, adhere to strategies of ISO-9001:2000 for quality program implementation. This includes Advanced Product Quality Planning (APQP), Process Control Planning, and the seven phases of Statistical Process Control (SPC):- Process Charting to identify materials and steps
- Ishikawa Diagram to identify all factors that influence the process
- Failure Mode and Effect Analysis (FMEA) to rate potential problems and the seriousness of each
- Critical Factor Identification to analyze the FMEA results
- Evaluation Testing
- Shewhart Charting, which allows advance operator control and warning
- Closing the Loop to identify preventive steps and ensure quality
In addition to SPC, five other quality-assurance techniques are employed:
- X-Ray Fluorescence Spectrometry (XRF) - PPM level/99.9% composition level
- Plasma Emission Spectroscopy (ICP) - PPM level/10% composition level
- Quantitative Metallography
- Electron Microscopy
- Process Emulation employing laboratory-scale induction and resistance furnaces
Milward Alloys, Inc. 500 Mill Street, Lockport, NY 14094-1712 USA
Phone: 716-434-5536 | Fax: 716-434-3257 | Toll-Free: 1-800-833-6600
E-Mail: milward@milward.com
ISO QUALITY CERTIFIED
© Copyright by Milward Alloys, Inc.