Milward Alloys
Home
About Milward
Master Alloys
Phosphorus-Copper
Custom Alloys
Quality Assurance
Industry Links
Distributors
Contact Us
Site Map
 		 

Phosphorus-Copper as an Alloying Agent

 Increases the strength, hardness and elasticity, while reducing creep and grain growth, when added to copper and copper-tin alloys, and in high performance electrical conductivity alloys.

Recommended Addition Procedure:
  1. Calculate the addition precisely.
  2. Adjust the bath temperature as close to the final operating temperature as possible.
  3. Skim the surface free of drosses or cover.
  4. Add the Phosphorus-Copper in waffle or shot form.

Precautions:
  • Apply a protective cover to the surface after alloying.
  • Always keep the Phosphorus-Copper dry.
 
Milward Alloys, Inc. 500 Mill Street, Lockport, NY 14094-1712 USA
Phone: 716-434-5536 | Fax: 716-434-3257 | Toll-Free: 1-800-833-6600
E-Mail: milward@milward.com

ISO QUALITY CERTIFIED

© Copyright by Milward Alloys, Inc.